SPX Power Team hydraulic technology

RH603 60-ton, Single-Acting, Spring-return Center-Hole Hydraulic Cylinder

Power Team offers solutions to overcome your heavy lift challenge with over 96 years of experience

We have a comprehensive RENTAL Department

RENT NOW

RH603 60-ton, Single-Acting, Spring-return Center-Hole Hydraulic Cylinder

The Power Team RH603 is a 60-ton, single-acting, spring-return center-hole hydraulic cylinder engineered for tensioning, pulling, and pushing operations where a through-rod or cable is required. It delivers a rated output of 60 tons at 10,000 psi, with a 3-inch strokeand acenter hole sized to accommodate tensioning rods, anchors, or cables. The single-acting configuration uses hydraulic pressure for extension and a high-strength internal spring for retraction, ensuring dependable return without the need for hydraulic force on the retract cycle. The cylinder’s chrome-plated pistonandPower Tech-treated body provide corrosion and wear resistance in demanding industrial or field conditions.

Constructed from high-strength alloy steel, the RH603 incorporates precision-ground internal bearing surfaces for load alignment and long service life. The collar threadandbase mounting configuration support use in fixed jigs, post-tensioning systems, or maintenance setups requiring accurate force application in confined spaces. A standard 3/8 inch NPTFport accepts Power Team hydraulic couplers for compatibility with 10,000 psi systems. The RH603 is part of Power Team’s RH Series center-hole cylinders, designed for structural stressing, bearing removal, and other heavy-duty operations requiring direct axial force transmission through a hollow piston.

VIEW MORE : SINGLE-ACTING CENTER HOLE

VIEW PDF DOCUMENT

Product code:

RH603

Capacity:

60-ton

Cylinder Type:

Center-Hole

Product code:

Single-Acting

Stroke Length:

3.00 in

Related Products

The RH603 is tailored for jobs where you need to push or pull through the cylinder, such as cable tensioning, anchor bolt operations, or forcing studs, thanks to its center-hole design (2-1/8in hole. Its 3-inch stroke affords a moderate travel which, combined with its robust 60-ton capacity, makes it suitable for heavy industrial tasks in construction, rigging, or maintenance environments. The threaded collar provides secure load hold when hydraulic pressure is removed, ensuring the load won’t drift or slip under dead-end conditions. The fact that the cylinder components are Power-Tech treated enhances its resistance to corrosion and wear in demanding working environments.

The RH603 features a limited 3-inch stroke, making it suitable for short-travel operations; applications requiring greater displacement should incorporate precision-machined spacer blocks or mechanical linkage systems to extend working range.

As a single-acting, spring-return unit, piston retraction is dependent on the internal bias spring, which may be impeded by high frictional resistance, side loading, or misalignment within the load path. Accurate axial alignment is critical, as eccentric or lateral forces can induce uneven wear on the bearing surfaces and piston rod, particularly when the center-hole configuration is utilized for tensioning applications.

Additionally, due to the high stored elastic energy within components such as the retainer nut and spring assembly, all maintenance, disassembly, or internal inspection should be performed exclusively by qualified service personnel following manufacturer procedures to ensure safety and maintain structural integrity.

The RH603 is rated for 60 tons at a design pressure near 9,75 psi, which scales to approximately 61.6 tons at 10,000 psi. It has a 3.00 in stroke, a retracted height of 9.25 in, and extends to 12.25 in. The effective piston area is 12.31 in², with an oil capacity of 37 in³. Its outside diameter is 6.25 in, piston rod diameter 3.59 in, and it features a center hole of 2.12 in (to allow rod, cable, or other pass-through elements). The threaded collar is 6¼-12, with 2.50 in length of thread, and base-to-port spacing is 1 in. As is common in the RH single-acting series, the standpipe, piston, and gland nut are treated with “Power-Tech” for corrosion and abrasion resistance.

Capacity: 60 ton
Stroke: 3.00 in
Retracted height: 9.25 in
Extended height: 12.25 in
Effective area: 12.31 in²
Oil capacity: 37.0 in³
Bore (cylinder internal diameter): 3.96 in
Piston rod diameter: 3.59 in
Center hole diameter: 2.12 in
Outside diameter: 6.25 in
Collar thread: 6¾-12 with 2.50 in collar length
Base to port (distance): 1.00 in
Coupler / porting: Supplied with a 9796 3/8 inNPT female half coupler
Materials / treatments:
• Cylinder “standpipe,” piston, and body are treated with Power-Tech (nitrocarburization) for corrosion and abrasion resistance. • Interchangeable piston head inserts allow switching from tapped to plain hole configurations.

Load / safety features:
• Withstands full dead-end loads (i.e. load can be held when the cylinder is fully extended without hydraulic pressure).
• Parts list warns the retainer nut is loaded with high spring force 230 lb - disassembly must be handled by authorized service centers.

From its parts documentation, the RH603 carries a retainer nut under spring preload of 230 lbs—this means disassembly is hazardous unless done by an authorized repair center because improper release of spring force can cause injury. Its parts list also clarifies that it supports “full dead-end loads” — i.e., loads can be held when the cylinder is fully extended without hydraulic pressure.

The cylinder is furnished with a standard 9796 3/8 in NPT female half coupler (typical for RH series except RH120) for hydraulic connection. Also, the RH603 allows interchangeable piston head inserts (plain vs threaded) to adapt to different mounting or tooling requirements.

RH Series Cylinder Specifications

Material Composition of RH Single-Acting Series Cylinders

1. Steel Construction (Single-Acting Models, 30–100 Ton)

The standpipe is made from steel and treated with a “Power Tech” corrosion-resistant finish.
The piston rod is plated steel, designed to resist wear and improve seal longevity.
These heavy-duty cylinders (30 – 100 ton, single-acting) are clearly built with robust steel components
Certain single-acting models—notably the RHA306—feature an aluminum cylinder body and piston. These are lighter and more portable while still offering durability.
Additionally, standpipe corrosion resistance is provided via the Power Tech treatment even when aluminum components are used.
Additional Notes
- The plated piston rod (with superior packing) appears to be common across the RH Series, enhancing wear resistance and sealing for longer cycle life.
- The Power Tech finish is applied to protect steel parts like the standpipe from corrosion

Comparable RH Series Cylinders

Product	Tonnage	Stroke	Return Type	Cylinder Type	Retracted Height	Extended Height
RH10010	100	10.13	Hydraulic-Return	Double-Acting	19.5 in	29.63
RH1508	150	8	Hydraulic-Return	Double-Acting	13.75 in	21.75
RH605	60	5	Hydraulic-Return	Double-Acting	9.5 in	14.5
RH503	50	3	Spring-Return	Single-Acting	7.13 in	10.13
RH1505	150	5	Hydraulic-Return	Double-Acting	12.25 in	17.25
RH120	12	0.31	Spring-Return	Single-Acting	2.19 in	2.5
RH306	30	6	Spring-Return	Single-Acting	9.75 in	15.75
RH2008	200	8	Hydraulic-Return	Double-Acting	16.06 in	24.06
RH1001	100	1.5	Hydraulic-Return	Double-Acting	6.5 in	8
RH303	30	3	Hydraulic-Return	Double-Acting	7.06 in	10.06
RH606	60	6	Spring-Return	Single-Acting	12.25 in	18.25
RH203	20	3	Spring-Return	Single-Acting	6.06 in	9.06
RH108	10	8	Spring-Return	Single-Acting	11.31 in	19.31
RH1003	100	3	Spring-Return	Single-Acting	10 in	13
RH102	10	2.5	Spring-Return	Single-Acting	5.31 in	7.81
RH202	20	2	Spring-Return	Single-Acting	6.13 in	8.13
RH206	20	6	Spring-Return	Single-Acting	12.13 in	18.13
RH121T	12	1.63	Spring-Return	Single-Acting	4.81 in	6.44
RH121	12	1.63	Spring-Return	Single-Acting	4.81 in	6.44
RH3010	30	10.13	Hydraulic-Return	Double-Acting	17.25 in	27.38
RH123	12	3	Spring-Return	Single-Acting	7.25 in	10.25
RH603	60	3	Spring-Return	Single-Acting	9.25 in	12.25
RH306D	30	6	Hydraulic-Return	Double-Acting	11.06 in	17.06
RH302	30	2.5	Spring-Return	Single-Acting	6.25 in	8.75
RHA604D	60	4	Hydraulic-Return	Double-Acting	9.5 in	13.5
RH6010	60	10.13	Hydraulic-Return	Double-Acting	18.06 in	28.19
RH1006	100	6	Hydraulic-Return	Double-Acting	12.38 in	18.38
RHA306	30	5.88	Spring-Return	Single-Acting	11.16 in	17.03